MPS Cutting line NC 600 LS
Product specifications
| Machine product | Testing method | ||
|---|---|---|---|
| Material | Aluminum extrusion profiles | ||
| Supply length | 7 meters, optionally longer | ||
| Profile cross-section | 340x170 mm , 220x200 | ||
| Cutting angle | 90 degrees | ||
Saw for high precision and output
This aluminium saw is ideal for straight cutting various aluminium profiles, especially for lengths under 1000 mm. In this range, the machine combines high output with excellent precision. Thanks to the unique clamping system, the machine can be widely used in sectors where aluminium is cut.
With a large cutting range and a powerful gripper system, both single profiles and bundles can be sawn. The modern display allows the operator to work manually or fully automatically. The large hinged safety guard provides protection as well as easy access to the saw area, while extraction ports help remove chips.
- 1
Positioning system
The feed system, with double clamping system on double linear guide, ensures accurate cutting positions.
The drive is provided by a ball screw system with servo positioning, with an accuracy of 0.02 mm.
- 2
Feed section
The MPS NC 600 LS sawing system has an automatic buffer magazine for feeding profiles. The magazine can store 10 sets of profiles with a spacing of 350 mm.
Reloading can take place during production, which increases the machine's uptime. A roller conveyor lifts the profiles to the feed system, which transports them to the head stop, just in front of the sawing unit.
Optional
MPS lifting aid, Lifting Aid LA-100
- 3
Sawing machine
Robust universal vertical clamps are located to the left and right of the saw, as well as horizontal clamps on both sides. The clamping pressure can be adjusted separately. For a good view of the saw table, the hinged saw hood is equipped with a viewing window and LED lighting on the inside.
The saw feed is available in two versions: a hydropneumatic version with height adjustment of the saw and a servo-controlled version, where the saw height and sawing speed can be set via the software.
- 4
Control unit
The control unit can be positioned in the ideal position thanks to the swivel arm.
The professional-looking 12" touchscreen displays all the information the operator needs.
- 5
Discharge system
The machine is equipped with a 4-meter discharge conveyor as standard, which can be extended in 2-meter modules.
The stable, closed discharge conveyor has a rear guide of 100 mm and a width of 450 mm. The cladding can be chosen from Trespa with wear strips, plastic rollers, or galvanized steel rollers.
- 1
MPS NC 600 LS sawing machine
The sawing machine is constructed from high-quality materials, with a thick welded base and a polished cast steel sawing table. The sawing bed and rear guide are equipped with wear-resistant plastic. As standard, the machine has a sawing cut widening, whereby the material is pulled out 2 mm on both the feed and discharge sides during return stroke.
Importer of quality machines and tools for 60 years.
Professional and reliable
Your trusted partner in the field of machine tools and service since 1965.
Strong in customization
Solutions for your specific needs, even if there are no standard machines available for them.
In-house service department
Regular maintenance at fixed, competitive rates, so you'll never be faced with unpleasant surprises!
